Products books and links Articles and How-To guides Home

Patterns and Equipment: Overclock Machines (Sergers): Serger Thread Tension and Special Serger Notions


Home page previous related article or category Overclock Machines (Sergers): Introduction and Stitch Types Next related page, article or category Tools for Every Sewing Need: Introduction and Measuring Tools









Serger Thread Tension

Thread tension on the serger is very different than the tension on your sewing machine. Often one of the biggest concerns for the sewer just learning to use her serger is dealing with the tension adjustments as most overlock machines have 4 to 5 tension dials or knobs to adjust. At first, these adjustments seem somewhat intimidating but become less so once their function is completely understood. Each tension dial or knob controls the thread for its corresponding needle or looper. The higher the number or a move to the +(plus) side means there is more tension on the thread -- less thread will pass through the machine. The lower the number or a move to the -- (minus) side means that there is less tension on the thread -- more thread will pass through the machine.

The trick is to find the perfect balance between all the threads. The upper and/or lower looper threads should lay on the fabric with the needle thread(s) looking like a straight stitch on the right side of the fabric. The looper threads should meet equally along the trimmed edge of the fabric. You will immediately know if the tension is incorrect by the appearance of your stitch.

FREE SHIPPING from Fabric.com

There are many factors that can effect the thread tension such as the type of thread you use, the weight of the fabric, the stitch length and the stitch width. As with all sewing projects, it is also important to start with a new needle and double check your threading before starting to turn dials. Be sure to test your stitch on a swatch of fabric before starting any garment.

Most sergers today use standard sewing needles as described in a Needle and Thread Chart. As the serger can accommodate a variety of decorative threads, it is equally important to use the correct needle for the thread. A special needle is recommend by some overlock machine manufacturers if you are experiencing difficulties with your cover stitch.

There are a number of special presser feet and accessories available for your serger. Check with your sewing machine dealer to learn more about them.

(continued below...)

Sewing at joann.com!
Fabric at joann.com!

Are you looking for sewing or crafts-related items such as sewing machines, sergers, yarn, and knitting supplies? Try our online catalog pages here:

Or see what products on our site the popular search engines have chosen to list...


If you need supplies, tools or equipment for your project, we recommend these trusted online merchants...

Sergers, Overlocks  Joann.com        FREE SHIPPING from Fabric.com

...they will deliver even the big stuff right to your door -- all at very reasonable prices.

Recommended Reading

           

Recommended Products

Gift Ideas for Sewing, Vacuums, and Household Appliances.

Bernina, Tacsew, Refrey Sewing Machines and Juki Sergers from AllBrands.com.

Singer Quantum Sewing Machines and Sergers

AllBrands.com Embroidery Machines

Want to learn more about sewing, knitting and related arts and crafts? Visit our exhaustive library.

If you need specific sewing supplies, browse through the products on pages like these:


Special Serger Notions

There are a few notions that are important when using your serger. They make your surging experience easier and more pleasant. We have shown just a few for your use.


    Fabric.com
  Joann.com Gift Certificates


Select Blinds, Inc.
Buy One, Get One 50% Off Select Accent Rugs until 02.25.07
LinenSource, Inc.






AllBrands.com
Top of Page previous related article or category Overclock Machines (Sergers): Introduction and Stitch Types Next related page, article or category Tools for Every Sewing Need: Introduction and Measuring Tools home

This page was last modified on: Tuesday, 2007-09-11 2:50 PST