|
|
GVRK+T Giant Hoop It All Kit Viking Rose and Iris 12 X 12" Embroidery Machines |
The GIANT hoop made it possible to hoop only once when embroidering the designs on the back of the jacket below the yoke. Without the GIANT Hoop-It-All the embroiderer would have had to hoop 7 times with the regular hoop provided with the machine and 2 times using their extended hoop. A total hooping of 9 times using the two hoops mentioned or 11 times using only the regular hoop provided by the manufacturer.The GIANT Hoop-It-All can also help in areas such as shirt fronts when embroidery is done above a pocket and between button holes. Although the hoop is not entirely used in this procedure it is simple to patch the small areas that have been used and then continue with more embroidery. We have embroidered on a pocket with the bracket on the top, and then between three buttonholes by removing the hoop sliding bracket from the top of the hoop and then placing it on the right side of it. We then moved the hoop to each location between the buttonholes to continue the embroidery.Each sewing machine is limited by its own built-in embroidery field. Embroidering in the center of the GIANT Hoop-It-All may be restricted by the sewing machine's limited sewing field. The GIANT Hoop-It-All can not change the embroidery field, but by using a sliding bracket, which can be placed on all sides of the hoop there is less need to re-hoop.If a center design is desired, mark the fabric with the center mark and bring close to one of the edges of the hoop and sew it off first. Remove the fabric and patch the area, and then replace on the hoop to continue with the balance of the designs.
|
|
FAQ
